Code: ACW1013
ertified by Bureau Veritas NZ Ltd to AS/NZS4453.3:1997 for chainsaw protection
Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection
Extra leg length to allow for lift while climbing
Fully fire-resistant, including outer fabric, chainsaw protective fabric and lining
Nomex®/Fire-resistant viscose ripstop outer fabric rated to 8.2 cal/cm2 according to ASTM D6413 for fire resistance
Uses Arrestex FR fully fire-resistant chainsaw protection material which will not melt or burn and is light, cool and rated to 20 m/s
Coverage from waist to ankle and around calf
FR lining
Reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010
Total weight less than 1.1 kg (Medium)
Elasticized waist increases comfort and fit
Opening in hem for debris removal
Belt loops to fit a 50 mm belt
Two zipped hip pockets and a zipped pocket on the left thigh for ease of access while wearing a harness
Abrasion resistant material over knee
Lock stitched seams and stress points reinforced
Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection
Extra leg length to allow for lift while climbing
Fully fire-resistant, including outer fabric, chainsaw protective fabric and lining
Nomex®/Fire-resistant viscose ripstop outer fabric rated to 8.2 cal/cm2 according to ASTM D6413 for fire resistance
Uses Arrestex FR fully fire-resistant chainsaw protection material which will not melt or burn and is light, cool and rated to 20 m/s
Coverage from waist to ankle and around calf
FR lining
Reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010
Total weight less than 1.1 kg (Medium)
Elasticized waist increases comfort and fit
Opening in hem for debris removal
Belt loops to fit a 50 mm belt
Two zipped hip pockets and a zipped pocket on the left thigh for ease of access while wearing a harness
Abrasion resistant material over knee
Lock stitched seams and stress points reinforced